Summer Starts Here - Save up to 70%
Tekonsha T-One Vehicle Wiring Harness Installation - 2013 Chrysler 300- Video
Today on our 2013 Chrysler 300, we're going to be taking a look at, and showing you how to install the Tekonsha T1 Vehicle Wiring Harness with four pole flat trailer connector, part number 118600.This is what our wiring is going to look like when it's installed. This is going to give us all of our proper lighting functions to safely flat tow our trailer. We're going to get both turn signals, our running lights, brake lights, and our ground. It's also going to come with a nice attached dust cap. It's going to help keep any dirt and debris from getting on our connection points. This wiring harness is made to live inside of the vehicle, so when not in use simply just roll it up and you can store it right down into your spare tire area. more
1/14/2019 11:47:13 AM
Best 2014 Chrysler 300 Custom Fit Vehicle Wiring Options- Video
Today we're going to be taking a look at the best custom fit vehicle wiring harness for your 2014 Chrysler 300. Here we have the two wiring harnesses for the Chrysler 300. As far as ease of installation, I'm going to have to give that to the CURT. As far as durability, I'm going to have to give that to the Tekonsha. As far as my personal opinion, I would go with the Tekonsha. It's built a little bit more durable than the CURT through personal experience with customers that have ordered this have returned the product because they have failed. more
12/18/2018 11:38:24 AM
Best 2012 Chrysler 300 Custom Fit Vehicle Wiring Options- Video
Today we're going to be taking a look at the best custom fit vehicle wiring harness for your 2012 Chrysler 300. Here we have the two wiring harnesses for the Chrysler 300. As far as ease of installation, I'm going to have to give that to the CURT. As far as durability, I'm going to have to give that to the Tekonsha. As far as my personal opinion, I would go with the Tekonsha. It's built a little bit more durable than the CURT through personal experience with customers that have ordered this have returned the product because they have failed. more
12/18/2018 11:38:06 AM
Best 2013 Chrysler 300 Custom Fit Vehicle Wiring Options- Video
Today we're going to be taking a look at the best custom fit vehicle wiring harness for the 2013 Chrysler 300. Here we have the two wiring harnesses for the Chrysler 300. As far as ease of installation, I'm going to have to give that to the Curt. As far as durability, I'm going to have to give that to the Tekonsha. And as far as my personal opinion, I would go with the Tekonsha. It's built a little bit more durable than the Curt. more
12/18/2018 11:37:49 AM
Best 2011 Chrysler 300 Trailer Wiring Options- Video
Today we're going to be taking a look at the best custom fit vehicle wiring harness for your 2011 Chrysler 300. Here we have the two wiring harnesses for the Chrysler 300. As far as ease of installation, I'm going to have to give that to the CURT. As far as durability, I'm going to have to give that to the Tekonsha. As far as my personal opinion, I would go with the Tekonsha. It's built a little bit more durable than the CURT through personal experience with customers that have ordered this have returned the product because they have failed. more
12/17/2018 1:52:13 PM
Trailer Wiring Harness Installation - 2013 Chrylser 300- Video
Today on our 2013 Chrysler 300 we will be installing the Curt T-Connector Vehicle Wiring Harness with 4 Pole Flat Trailer Connector, part number C56145. When we want to use the wiring we'll just take some out of the trunk like so so we can make our connection to the trailer. Make sure we avoid the latch here and close the trunk on over it. This will keep it secure and it'll be easy to use. When you're done towing your trailer you open the trunk back up, lift up on the spare tire cover panel and store your wires just like so and have full access to your trunk; you don't have to worry about snagging the wire on anything. Here's what comes in our wiring harness package. We have our control module here, which will prevent any voltage being back fed into the vehicle's wiring harness. more
6/20/2016 3:55:22 PM
Trailer Wiring Harness Installation - 2010 Chrysler 300- Video
Today on our 2010 Chrysler 300 we're going to be installing the tow ready T1 vehicle harness with the four pull flat trailer connector its part number is 118406. Now when ready for use we'll just pull our four pull wire out, bring our cover down and over. Now when your using it pull out whatever length you need to make your connection and we'll let it rest right over the gasket. We want to avoid the latch section there, but then when you close it your gaskets going to hold that in place and give you a nice pig tail out here where you can use it. The cover over the top here can come in pretty handy, for getting this kind of tucked away we can use this as almost like a buckle or a strap for it. Get it all squeezed together real close and bring that around like that. Kind of keep it bundled up there nice little tuck in area there you wouldn't even have to tuck it in underneath. more
5/22/2015 7:57:52 AM
Trailer Wiring Harness Installation - 2009 Chrysler 300- Video
Today on our 2009 Chrysler 300 we'll be installing the Tow Ready T1 Vehicle wiring harness with four-pole flat trailer connector, part number 118406. To begin with, we'll go ahead and open up the trunk. Both on the driver and the passenger side, there's a small plastic wing nut that'll need to be removed and the carpet pulled back to gain access to the wiring connections. Now that we have both of these removed and the carpet pulled back some, we'll go ahead and start on the passenger side. Before we can remove the factory wiring connection, we need to pull the red tab, which is the locking tab, to the open position on the connection. With that done, we'll go ahead and squeeze the small tab and pull the connector apart. We'll open up the center section of the trunk, or lift it up, exposing the spare tire, as well as the battery. Next we'll go ahead and connect our T1 connector in-line, matching up the male and female opposite ends so that you put the T1 connection in-line for the factory harness. more
11/24/2014 4:22:04 PM
Trailer Wiring Harness Installation - 2005 Chrysler 300- Video
Today on our 2005 Chrysler 300 we'll be installing the Tow Ready T-One Connector, part number 118404. We'll go ahead and show you how to use the new 4-pole connector. Well simply take the 4-pole and run it out and down to the hitch or accessory, being careful to stay away from the ledge as pinching the wire off in the ledge can harm the wire. However, the weather stripping is thick enough that it won't and we'll simply close the rear cargo door on it. Once we're finished using our new 4-pole connector, we'll roll it up and store it under the spare tire cover. To install our new 4-pole connector, we'll simply open up the rear cargo door or trunk. We'll need to access the wiring behind the driver and passenger side tail lights. Here on the passenger side we'll go ahead and remove the plastic wing nut and pull back the carpeting to gain access. more
10/27/2014 2:44:19 PM
Filter Videos
Filter Videos
